SM-858D Hot Air Soldering Station
Description
SM-858D hot air soldering station achieves welding by heating the soldering tin. It is made up of air pump, linear circuit board, airflow stabilizer, handle components and air blower gun. It supplies heat to melt the solder so that it can flow into the joint between two work-pieces. This soldering station is suitable for electronic appliance repairing, electronic integrated circuit and chip.
Advantages
1. SM-858D hot air soldering station has antistatic function which can be used for protecting PCB faceplate when there is static electricity or electric leakage.
2. It has automatic sleep function which helps to reduce power consumption. With automatic cooling function, the bassoon and heating element can be protected.
3. When the temperature of handle is more than 90°C, the instrument will stop power supply automatically. This reduces the possibility of damaging the handle.
4. SM-858D hot air soldering station has small size therefore it saves working place. Besides, air volume and temperature of this instrument can be adjusted.
Parameters
| Model | SM-858D |
| Display | LED Display |
| Temperature Resolution | 1℃ |
| Power Consumption | 650W |
| Air Pump Type | Brushless DC wind motor |
| Air Flow | Max. 120 L/min |
| Temperature Range | 100℃ to 450℃ |
| Noise | ﹤45dB |
| Operating Ambient | -10℃ to + 50℃/ 30% RH to 90% RH |
| Size | 138 (H) × 100 (W) × 150 (D) cm |
| Line Voltage | 220VAC ±10%, 50Hz-60Hz |
| Weight | 1.8 kg |
Notes
1. During working process the temperature of tuyere and discharged hot air are very high. Please pay attention to it in case of scalding and do not touch the tuyere.
2. When using SM-858D hot air soldering station, please do not put the tuyere directly to the parts to be processed in case of damaging.
3. Pay attention to the wind power and temperature. If they are too strong, the heat with too wide range will damage the other parts around.
4. Pay attention to personal safety. When the instrument is just closed, please do not touch the tuyere.
5. After welding, please switch off the power of SM-858D hot air soldering station. The air pressure gun will continue to blow out air. Please unplug the power plug until the air injection finished.
Maintenance
1. Please keep regular cleaning in order to maintain good ventilation.
2. Do not spray cleaner directly onto the instrument. Please use a soft cloth with mild detergent and water instead.
- SM-850 Hot Air Soldering StationSM-850 hot air soldering station achieves welding by heating the soldering tin. It supplies heat to melt the solder so that it can flow into the joint between two work-pieces. This instrument is suitable for electronic appliance repairing, electronic integrated circuit and chip.1. SM-850 hot air soldering station has antistatic function which can...