15 MHz Low Frequency Signal Generator
Description
15 MHz low frequency signal generator is a device that generates different types of electrical waveforms over a wide range of frequencies. It can be widely used in developing, testing and repairing electronic equipment.
Features
1. Waveform of 15 MHz low frequency signal generator can be sine or square.
2. Frequency of this electronic oscillator is 0.1Hz - 15MHz
Parameters of 15 MHz Low Frequency Signal Generator
| Specifications (Model: MAG2015AD) | |
| Output Signals | |
| Waveforms | Sine, Square |
| Frequency Range | 0.1Hz - 15MHz in 6 ranges |
| Output Amplitude | ≥20Vp-p (open circuit), ≥10Vp-p (with 50Ω load) |
| Output Impedance | 50Ω ± 10% |
| Attenuator | 0, 20, 40, 60dB |
| Distortion of Sine | <1% at 10Hz-100KHz |
| Rising Edge of Square | ≤100ns |
| Frequency Meter | |
| Measuring Range | 1Hz-30MHz |
| Input Impedance | 1MΩ/20pF |
| Sensitivity | 50mVrms |
| Max Input | 150V AC+DC (with attenuator) |
| Input Attenuator | 0dB, 20dB |
| Accuracy | ±0.003% ± 1 digit |
| General | |
| Power Supply | AC 220V ± 10%, 50-60Hz (110V ± 10% Optional) |
| Operation Ambient | 0℃ to 40℃/≤ 90% RH |
| Dimension | 310 (W) × 100 (H) × 260 (D) mm |
| Weight | 3.7kg |
Notes
1. 15 MHz low frequency signal generator should adopt suitable line voltage.
2. The grounding conductor of power cord should be connected to ground.
Maintenance
1. To maintain good ventilation, regular cleaning should be carries out.
2. Please do not spray cleaner directly onto the instrument. Use a soft cloth with mild detergent and water.
3. Before using the instrument, please check whether there is any damage in it and whether there is signal after it is charged with electricity. If the instrument is not in use for a long time, please also check whether there is any corrosion or aging phenomenon in binding post of output unit.
4. After operation, please clean the connections in binding post and also turn off the power. Close the chassis cover and put it in dry, clean, ventilated places without any corrosive gas.
- 1 MHz Low Frequency Signal Generator1 MHz low frequency signal generator is a sine-wave generator used to generate different types of electrical waveforms. It is suitable for developing, testing and repairing electronic equipment.1. Parameters of output signal can be adjusted within a certain scope. Thus 1 MHz low frequency signal generator has good stability.2. Electronic oscillator also has the...