SM-702 2 in 1 Soldering Station
Description
Soldering station is a tool used in soldering. It supplies heat to melt the solder so that it can flow into the joint between two work-pieces. SM-702 2 in 1 soldering station means the combination of temperature controlled and hot air soldering station.
Advantages
1. SM-702 2 in 1 soldering station adopts precise CPU digital temperature control circuit therefore it ensures accurate temperature and stable air quantity.
2. It adopts double power design, thus the hot air gun and temperature control soldering iron can choose to operate independently.
3. With big power and high warming speed, this instrument is precise and stable in temperature control, which is not affected by air volume.
4. Hot air gun is equipped with air leakage prevention design and temperature controlled soldering iron. Besides, it is easy to replace the heater.
Parameters
| Iron | |
| Power Consumption | 60W |
| Temperature Range | 200°C - 480°C |
| Heating Element | Ceramic heater |
| Hot Air | |
| Power Consumption | 250W |
| Temperature Range | 100°C - 480°C |
| Air Pump | Diaphragm type |
| Air Flow | Up to 24 l/min |
| Others | |
| Accessories | IC pick up, nozzle A1124, A1125, A1130 |
| Line Voltage | 220V/110V ±10% 50Hz-60Hz |
| Dimension | 249 (W) × 125 (H) × 186 (D) mm |
| Weight | 4.5 kg |
Notes
1. The instrument should adopt suitable line voltage.
2. The grounding conductor of power cord should be connected to ground in case of electrical shock.
Maintenance
1. When the new iron or iron head is put in use for the first time, the welding head should be burnt for half an hour immersed in rosin and solder.
2. If SM-702 2 in 1 soldering station is not in need temporarily, please turn off the power. On the one hand it saves electricity and on the other hand, the welding head under high temperature for a long time will accelerate its aging.
- SM-899D 2 in 1 Soldering StationSM-899D 2 in 1 soldering station is a tool used in soldering. It supplies heat to melt the solder so that it can flow into the joint between two work-pieces. This device is most often used for installation, repairs and limited production work in electronics assembly.SM-899D 2 in 1 soldering station features microcomputer control, LED display, adjustable...