Single Output Switching Mode Power Supply (0-30V/0-2A)
Description
30V/2A single output switching mode power supply is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently. Like other power supplies, SMPS transfers power from a source to a load such as a personal computer. It is used as replacement for linear regulator when higher efficiency, smaller size or lighter weight is required.
Advantages
1. 30V/2A single output switching mode power supply features small volume, low noise, light weight, energy saving and high efficiency.
2. The voltage and current of DC stabilized power supply are constant. Besides, the voltage and current are continuously adjustable according to different requirements.
3. It has high filtering efficiency thus the capacity and volume of filter capacitor are greatly reduced. Therefore, it ensures high reliability of switching mode power supply.
4. This instrument has wide voltage stabilization range. When there is a big voltage change in frequency grid, DC regulated power supply is able to ensure stable output voltage.
Features
30V/2A single output switching mode power supply features overall output protection, high stability, full scale long time operation, continuously adjustable voltage and current, slim and light as well as CC/CV mode auto switching.
Parameters
| Model No. | LANTYCA-K302D |
| Line Voltage | 200-240VAC,50Hz-60Hz |
| Input Current (at 220VAC,full load) | 0.4A |
| Output Voltage Range | 0-30V |
| Output Current Range | 0-2A |
| Voltage Display Accuracy | ±0.5% |
| Current Display Accuracy | ±0.5% |
| Efficiency | >85% |
| Voltage Regulation | |
| Load Regulation (10-100%) | 50mV |
| Line Regulation (200-240VAC) | 20mV |
| Ripple & Noise (P-P) | 30mV |
| Current Regulation | |
| Load Regulation (10-100%) | 20mA |
| Line Regulation (200-240VAC) | 20mA |
| Ripple & Noise (P-P) | 20mA |
| Others | |
| Operating Ambient | -10℃ to + 60℃/30% RH to 90% RH |
| Size | 7 (W) × 16 (H) × 22 (D) cm |
| Weight | 1.35 kg |
Notes
1. 30V/2A single output switching mode power supply should adopt suitable line voltage.
2. To avoid electrical shock, the grounding conductor of power cord should be connected to ground.
Maintenance
1. The most important things are dust prevention and heat dissipation. Besides, do not operation the machine in overload condition.
2. Keep away from gas, steam, chemical deposition, dust, greasy dirt and other explosive or corrosive medium when you install DC stabilized power supply. Then the insulating property of the machine will be well-protected. Try to avoid the action of vibration or turbulence.
3. The machine should always be in a vertical state without any wind, snow, ice or hail.
- Single Output Switching Mode Power Supply (0-30V/0-3A)Single output switching mode power supply (0-30V/0-3A) is an electronic device used to supply constant voltage or constant current to an electrical load. Like other power supplies, SMPS transfers power from a source to a load such as a personal computer. Single output means there is one set of voltage output.30V/3A single output switching mode power supply is...